催化学报

Select

第34卷第9期目次

2013, 34 (9): 0-0.

摘要 ( 209 )

PDF(1057KB) ( 612 )

Select

微流控技术制备微胶囊负载钯催化剂

刘莹, 吕阳成, 骆广生

2013, 34 (9): 1635-1643. DOI: 10.1016/S1872-2067(12)60630-5

摘要 ( 598 ) [Full Text(HTML)] ()

PDF(894KB) ( 691 )

采用微流控技术结合悬浮聚合方法实现了百微米级含膦配体聚苯乙烯微胶囊的可控制备, 微胶囊尺寸在320~420 μm范围内可调, 且单分散性好. 扫描电子显微镜、能量散射光谱和电感耦合等离子发射光谱结果证实了其形貌和组成的均匀性及钯负载的可控性和有效性. 以溴代芳烃与苯硼酸的Suzuki偶联反应为模型反应评价了负载Pd(PPh₃)₄的百微米级微胶囊的催化性能, 发现其性能与文献报道的7~8 μm的同类催化剂微胶囊接近, 且均优于均相催化剂; 该催化剂经简单过滤后, 可实现多次循环使用, 未发现活性物种的流失. 该法实现了连续制备, 因而有助于提高制备的效率和可控性. 另外, 所制百微米级催化剂微胶囊在固定床反应器内具有较高催化剂浓度和机械性能, 且优于浆态床中使用的微米级催化剂微胶囊.

Select

基于C-H键活化的铜催化二苄胺氧化酰胺化反应

胡金金, 左秀锦, 黄汉民

2013, 34 (9): 1644-1650. DOI: 10.1016/S1872-2067(12)60617-2

摘要 ( 515 ) [Full Text(HTML)] ()

PDF(459KB) ( 566 )

基于铜催化的C-H键活化构建了一类高效的二苄胺氧化酰基化生成N-苄基苯甲酰胺的反应. 该反应使用CuBr作为催化剂, 二乙酸碘苯作为氧化剂, 在温和条件下生成两种酰胺, 总产率最高可达92.0%. CuBr催化剂价廉易得, 催化活性高. 同时这也是首次使用二乙酸碘苯作为氧化剂, 通过二苄胺的直接氧化酰基化反应合成N-苄基苯甲酰胺.

Select

水相中底物促进的铜催化氨基醇N-芳基化反应

金明, 赵丹, 何国珍, 童耀, 韩世清

2013, 34 (9): 1651-1655. DOI: 10.1016/S1872-2067(12)60623-8

摘要 ( 465 ) [Full Text(HTML)] ()

PDF(439KB) ( 879 )

在水相体系中, 利用铜催化一系列氨基醇类底物(1.2 mmol)与碘代芳烃(1.0 mmol)进行N-芳基化反应. 由于氨基醇具有双齿配位及相转移催化能力, 该反应利用氨基醇类底物自身的促进作用, 在不使用外加配体与相转移催化剂的温和条件下以高收率获得了氨基醇N-芳基化产物(64%-93%).

Select

基于第一性原理方法研究ReO_x在ReO_x-Rh/ZrO₂和ReO_x-Ir/ZrO₂催化的甘油氢解反应中的作用机制

关静, 陈秀芳, 彭功名, 王喜成, 曹泉, 兰峥岗, 牟新东

2013, 34 (9): 1656-1666. DOI: 10.1016/S1872-2067(12)60626-3

摘要 ( 446 ) [Full Text(HTML)] ()

PDF(2694KB) ( 948 )

采用密度泛函理论研究了ZrO₂负载的Ru基、Rh基以及Re改性的Rh基、Ir基催化剂上甘油氢解生成1,2-丙二醇和1,3-丙二醇的热力学过程, 重点考察了ReO_x调变催化剂活性和选择性的作用机制. 结果表明, Ru/ZrO₂和Rh/ZrO₂催化剂上甘油分解经由脱水-加氢反应途径, 1,2-丙二醇的生成是热力学有利过程, 其中Ru基催化剂活性更高. 在Re修饰的Rh基和Ir基催化剂上, 反应遵循直接氢解机理, 其中金属表面解离的氢原子进攻ReO_x团簇上与醇盐紧邻的C-O键是催化甘油转化为丙二醇最核心的步骤. ReO_x-Rh/ZrO₂催化剂上1,2-丙二醇为主要产物, 并伴随1,3-丙二醇的生成, ReO_x的修饰则显著提高了Ir/ZrO₂催化剂上1,3-丙二醇选择性. 与单金属催化剂上发生的间接氢解机理相比, 修饰催化剂上1,3-丙二醇选择性的提高可主要归因于Rh(Ir)-Re协同催化的直接氢解反应过程, 其中羟基化铼官能团有利于末端醇盐中间体的生成. ReO_x-Ir/ZrO₂催化剂上较大的Ir-Re团簇使得末端金属醇盐的立体优选性比次级醇盐更为突出, 从而具有最高的1,3-丙二醇选择性.

Select

室温有氧条件下高稳定性Pd(P-Phos)Cl₂配合物催化Suzuki-Miyaura交叉偶联反应

葛轶岑, 程雨晶, 付海燕, 郑学丽, 李瑞祥, 陈华, 李贤均

2013, 34 (9): 1667-1673. DOI: 10.1016/S1872-2067(12)60620-2

摘要 ( 494 ) [Full Text(HTML)] ()

PDF(501KB) ( 708 )

制备了新型Pd(P-Phos)Cl₂配合物, 并通过¹H, ¹³C和³¹P核磁共振及X射线单晶衍射对其结构进行了确认及表征. 结果表明, 该配合物是室温有氧条件下Suzuki-Miyaura交叉偶联反应的高稳定高效催化剂, 并具有广泛的底物适用性. 催化剂用量较低, 且转化数(TON)最高可达49000.

Select

稻壳炭基固体酸催化剂的制备及其催化酯化反应性能

李明, 陈登宇, 朱锡锋

2013, 34 (9): 1674-1682. DOI: 10.1016/S1872-2067(12)60634-2

摘要 ( 644 ) [Full Text(HTML)] ()

PDF(516KB) ( 958 )

以热解稻壳炭为原料, 浓硫酸为磺化剂制备了固体酸催化剂. 采用X射线衍射、X射线光电子能谱、元素分析、孔结构分析和热重-质谱联用等手段对其进行了表征. 以油酸和甲醇的酯化为探针反应, 考察了磺化温度和时间对催化剂活性的影响, 探讨了反应条件对油酸转化率的影响, 并对所制催化剂的稳定性进行了研究. 结果表明, 制备该催化剂的适宜磺化温度和时间分别为90℃和0.25 h, 在该条件下制得的催化剂为无定形碳结构, 磺酸基密度为0.7 mmol/g. 该催化剂表现出较高的催化酯化反应活性, 在催化剂用量为5%、甲醇/油酸摩尔比为4、酯化温度和时间分别为110℃和2 h的条件下, 油酸的酯化率可达98.7%. 该催化剂具有较好的稳定性, 经7次连续反应后, 油酸的酯化率仍可达96.0%.

Select

Au/γ-MnO₂催化剂催化无溶剂条件下甲苯氧化反应

姜枫, 朱晓文, 符宝嵩, 黄金金, 肖国民

2013, 34 (9): 1683-1689. DOI: 10.1016/S1872-2067(12)60633-0

摘要 ( 374 ) [Full Text(HTML)] ()

PDF(898KB) ( 1369 )

采用氧化还原法制备了α, δ, γ-MnO₂载体, 采用原位还原法制备了Au负载量为0.5%-3.0%的Au/γ-MnO₂催化剂, 并采用X射线衍射、扫描电镜、透射电镜和N₂物理吸附等手段对其进行了表征. 透射电镜照片表明Au/γ-MnO₂催化剂中Au颗粒的大小约为10 nm. 采用无溶剂存在下的甲苯氧化反应测试所制备样品的催化活性. 结果表明, 甲苯转化率随着Au负载量的增加而增大. 这是由于Au颗粒数量增多, 尺寸减小的缘故. 同时, 负载Au颗粒对苯甲醛具有较高的选择性. Au/γ-MnO₂催化剂具有良好的重复使用性.

Select

Ionic-liquid-catalyzed green synthesis of coumarin derivatives under solvent-free conditions

Hamid Reza Shaterian, Morteza Aghakhanizadeh

2013, 34 (9): 1690-1696. DOI: 10.1016/S1872-2067(12)60654-8

摘要 ( 474 ) [Full Text(HTML)] ()

PDF(326KB) ( 1100 )

Brönsted acidic ionic liquids, namely 2-pyrrolidonium hydrogen sulfate, N-methyl-2-pyrrolidonium hydrogen sulfate, N-methyl-2-pyrrolidonium dihydrogen phosphate, (4-sulfobutyl)tris(4-sulfophenyl)phosphonium hydrogen sulfate, and triphenyl(propyl-3-sulfonyl)phosphonium toluenesulfonate, catalyzed efficient Pechmann condensation of phloroglucinol with β-keto ethyl/ methyl esters. 5,7-Dihydroxy-4-methylcoumarin and 5,7-dihydroxy-4-phenylcoumarin were prepared in good to excellent yields under mild, ambient, and solvent-free conditions. Pyrano[2,3-h] coumarins were then prepared by one-pot three-component reactions of 5,7-dihydroxy-4-subsituted coumarin, malononitrile, and aldehydes in the presence of catalytic amounts of Brönsted basic ionic liquids, namely 2-hydroxyethylammonium formate, 3-hydroxypropanaminium acetate, 1-butyl-3-methylimidazolium hydroxide, pyrrolidinium formate, and pyrrolidinium acetate, under thermal solvent-free conditions. The catalysts are environmentally benign and can be easily prepared, stored, and recovered without significant loss of activity.

Select

CoFe₂O₄ nanoparticles：An efficient heterogeneous magnetically separable catalyst for “click” synthesis of arylidene barbituric acid derivatives at room temperature

Jaspreet Kaur Rajput, Gagandeep Kaur

2013, 34 (9): 1697-1704. DOI: 10.1016/S1872-2067(12)60646-9

摘要 ( 403 ) [Full Text(HTML)] ()

PDF(787KB) ( 976 )

A coprecipitation method was used to synthesize superparamagnetic CoFe₂O₄ nanoparticles without using any capping agents/surfactants. The prepared nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, a vibrating sample magnetometer (VSM), N₂ adsorption and thermogravimetric/differential thermal analysis/differential thermal gravimetry techniques. The synthesized spinel CoFe₂O₄ nanoparticles had an average size of 2-8 nm with a high surface area (140.9 m²/g). The field-dependent magnetization, demonstrated by VSM and saturation magnetization, was found to be 1.77 emu/g. An efficient method was used for the synthesis of arylidene barbituric acid derivatives using CoFe₂O₄ magnetic nanoparticles as a magnetically separable and reusable catalyst in aqueous ethanol. The attractive features of this synthetic protocol were very short reaction time, high yields, high turnover frequency, simple work-up procedure, economy, a clean reaction methodology, and chemoselectivity, as well as provision of an ecofriendly and green synthesis.

Select

Cu-ZnO催化剂上水活化的第一性原理研究

姚锟, 王莎莎, 顾向奎, 苏海燕, 李微雪

2013, 34 (9): 1705-1711. DOI: 10.1016/S1872-2067(12)60642-1

摘要 ( 446 ) [Full Text(HTML)] ()

PDF(584KB) ( 710 )

采用密度泛函理论计算研究了水在Cu-ZnO催化剂表面上不同位点的解离过程. 结果发现, 水在纯Cu密堆积面和台阶面解离能垒都较高; 而在负载的ZnO薄膜上, 由于水解离过程能垒较低并且反应约为热中性, 水将会在表面上部分解离并达到动力学平衡. Cu-ZnO界面被确定为水解离的活性中心. 水解离后产生的H原子和羟基均可以较大吸附能吸附在界面处, 并且界面处的类似台阶结构大大降低了解离能垒, 从而使得水的解离可自发进行. 另外, H原子和羟基在ZnO薄膜表面可以较低的能垒扩散, 因此水解离活性位点可以持续催化后续解离过程. 该结果深化了对水在Cu-ZnO催化剂表面活化过程的认识.

Select

Methanol electro-oxidation on a porous nanostructured Ni/Pd-Ni electrode in alkaline media

Mir Ghasem Hosseini, Mehdi Abdolmaleki, Sajjad Ashrafpoor

2013, 34 (9): 1712-1719. DOI: 10.1016/S1872-2067(12)60643-3

摘要 ( 470 ) [Full Text(HTML)] ()

PDF(848KB) ( 807 )

A nanostructured Ni/Pd-Ni catalyst with high activity for methanol oxidation in alkaline solution was prepared by electrodeposition followed by galvanic replacement, that is, electrodeposition of Ni-Zn on a Ni coating with subsequent replacement of the Zn by Pd at the open circuit potential in a Pd-containing alkaline solution. The surface morphology and composition of the coatings were examined by energy dispersive X-ray spectroscopy and scanning electron microscopy. The Ni/Pd-Ni coatings were porous and were composed of discrete Pd nanoparticles of about 58 nm. The electrocatalytic activity of the Ni/Pd-Ni electrodes for the oxidation of methanol was examined by cyclic voltammetry and electrochemical impedance spectroscopy. The onset potentials for methanol oxidation on Ni/Pd-Ni were 0.077 V and 0.884 V, which were lower than those for flat Pd and smooth Ni electrodes, respectively. The anodic peak current densities of these electrodes were 4.33 and 8.34 times higher than those of flat Pd (58.4 mA/cm² vs 13.47 mA/cm²) and smooth Ni (58.4 mA/cm² vs 7 mA/cm²). The nanostructured Ni/Pd-Ni electrode is a promising catalyst for methanol oxidation in alkaline media for fuel cell application.

Select

氢分离与CO催化甲烷化双功能型钯复合膜

胡小娟, 严文俊, 丁维华, 俞健, 黄彦

2013, 34 (9): 1720-1729. DOI: 10.1016/S1872-2067(12)60636-6

摘要 ( 431 ) [Full Text(HTML)] ()

PDF(898KB) ( 688 )

以多孔Al₂O₃陶瓷为基体材料, 采用浸渍法担载NiO后用2B铅笔修饰NiO/Al₂O₃表面, 通过化学镀法沉积约5 μm厚的金属钯, 还原后成功制得Pd/Pencil/Ni/Al₂O₃膜. 为进行对比, 还制备了未担载镍的Pd/Pencil/Al₂O₃膜. 膜的表面和断面形貌分别采用扫描电镜和金相显微镜观测, 膜的透氢动力学通过H₂/N₂单气体法测试, 并以成分为H₂ 77.8%, CO 5.2%, CO₂ 13.5%和CH₄ 3.5%的原料氢测定了膜的氢分离效果. 结果表明, 未载镍的Pd/Pencil/Al₂O₃膜只具有氢分离作用, 而Pd/Pencil/Ni/Al₂O₃膜还可以有效地将钯膜泄漏的CO和CO₂转化为甲烷, 因而成为双功能型钯膜. 这种双功能膜尤其适用于面向质子交换膜燃料电池(PEMFC)的氢气分离, 既有效解决了PEMFC对氢燃料中CO格外敏感的难题, 又提高了对钯膜缺陷的容忍度, 因而延长了钯膜的使用寿命.

Select

{[K.18-Crown-6]Br₃}_n：A tribromide catalyst for the catalytic protection of amines and alcohols

Gholamabbas Chehardoli, Mohammad Ali Zolfigol, Fateme Derakhshanpanah

2013, 34 (9): 1730-1733. DOI: 10.1016/S1872-2067(12)60644-5

摘要 ( 370 ) [Full Text(HTML)] ()

PDF(381KB) ( 574 )

{[K.18-Crown-6]Br₃}_n, a unique tribromide-type catalyst, was utilized for the N-boc protection of amines and trimethylsilylation (TMS) and tetrahydropyranylation (THP) of alcohols. The method is general for the preparation of N-boc derivatives of aliphatic (acyclic and cyclic) and aromatic, and primary and secondary amines and also various TMS-ethers and THP-ethers. The simple separation of the catalyst from the product is one of the many advantages of this method.

Select

淀粉基炭负载纳米铜催化合成碳酸二甲酯

任军, 郭长江, 杨雷雷, 李忠

2013, 34 (9): 1734-1744. DOI: 10.1016/S1872-2067(12)60640-8

摘要 ( 416 ) [Full Text(HTML)] ()

PDF(773KB) ( 691 )

以硝酸铜和可溶性淀粉为原料, 经过溶胶-凝胶化过程、高温炭化和KOH活化得到炭负载铜催化剂(Cu/C), 采用扫描电镜、透射电镜、X射线衍射、热重-差热分析仪、N₂吸附和CO程序升温脱附对催化剂结构进行了表征, 并考察了它在甲醇氧化羰基化合成碳酸二甲酯(DMC)反应中的催化活性. 结果表明, 活化温度和KOH用量对催化剂的表面结构及金属铜粒子尺寸影响显著, 当活化温度为850℃, KOH:C=1 (质量比)时, Cu/C催化剂的比表面积达到1690 m²/g, 铜纳米粒子平均晶粒尺寸为30.4 nm, 催化活性最高, DMC时空收率达到235.7 mg·g^-1·h^-1, 甲醇转化率和DMC选择性分别为1.6%和76.5%.

Select

载体表面氧化程度对Ni/SiC甲烷化催化剂性能的影响

张国权, 彭家喜, 孙天军, 王树东

2013, 34 (9): 1745-1755. DOI: 10.1016/S1872-2067(12)60639-1

摘要 ( 351 ) [Full Text(HTML)] ()

PDF(612KB) ( 724 )

采用等体积浸渍法制备了Ni/SiC甲烷化催化剂, 研究了SiC载体表面氧化程度对催化剂低温活性和高温稳定性的影响, 并采用热重-差示扫描量热、N₂物理吸附、傅立叶变换红外光谱、氨程序升温脱附、X射线衍射、氢程序升温还原和氢化学吸附技术对样品进行了表征. 结果表明, 随着载体氧化温度的提高, 催化剂的比表面积和镍分散度降低, 但还原性和反应稳定性提高. 未氧化载体所负载催化剂的高温稳定性最差, 其原因在于载体对镍粒子的固定作用最弱. 负载于500和700℃处理的SiC载体上的催化剂具有较好的低温活性和高温稳定性, 这是因为适度氧化后的载体能较好地分散并固定镍粒子. 900℃处理的载体因过度氧化形成了低活性的氧化层, 使负载的镍粒子变大, 因而催化剂的低温活性最差.

Select

Novel catalytic and effluent decolorization functionalities of sol-gel immobilized Pleurotus ostreatus IBL-02 manganese peroxidase produced from bio-processing of wheat straw

Muhammad Asgher, Bazgha Aslam, Hafiz Muhammad Nasir Iqbal

2013, 34 (9): 1756-1761. DOI: 10.1016/S1872-2067(12)60647-0

摘要 ( 295 ) [Full Text(HTML)] ()

PDF(303KB) ( 722 )

Solid state bio-processing of wheat straw was carried out through an indigenous fungal strain Pleurotus ostreatus IBL-02 under pre-optimized fermentation conditions. The maximum activity, 692±12 U/mL, of the industrially important manganese peroxidase (MnP) enzyme was recorded after five days of still culture incubation. The crude MnP was 2.1-fold purified with a specific activity of 860 U/mg after purification on a Sephadex-G-100 gel column. On native and SDS-PAGE electrophoresis gels, the purified MnP fraction was a single homogenous band of 45 kDa. An active fraction of MnP was immobilized using hydrophobic sol-gel entrapment comprising tetramethoxysilane (T) and propyltrimethoxysilane (P) at different T:P molar ratios. Characterization revealed that after 24 h incubation at varying pH and temperatures, the MnP fraction immobilized at a T:P ratio of 1:2 in the sol-gel retained 82% and 75% of its original activity at pH 4 and 70^oC, respectively. The optimally active fraction at a 1:2 T:P ratio was tested against MnSO₄ as a substrate to determine the kinetic catalytic constants K_Mand V_max. To explore the industrial applicability of P. ostreatus IBL-02 MnP, both the free and immobilized MnP were used for the decolorization of four different textile industrial effluents. A maximum of 100% decolorization was achieved for the different textile effluents within the shortest time period. A lower K_M, higher V_max, hyper-activation, and enhanced acidic and thermal resistance up to 70℃ were the novel catalytic features of the sol-gel immobilized MnP, suggesting that it may be a potential candidate for biotechnological applications particularly for textile bioremediation purposes.

Select

Low temperature CO oxidation over mesoporous CuFe₂O₄nanopowders synthesized by a novel sol-gel method

Ehsan Amini, Mehran Rezaei, Mohammad Sadeghinia

2013, 34 (9): 1762-1767. DOI: 10.1016/S1872-2067(12)60653-6

摘要 ( 471 ) [Full Text(HTML)] ()

PDF(684KB) ( 809 )

Mesoporous CuFe₂O₄solid solution nanopowders with high specific surface areas were synthesized by a novel, very simple and inexpensive sol-gel route using propylene oxide as gelation agent, and used as the catalyst in low temperature CO oxidation. The samples were characterized by X-ray diffraction, N₂ adsorption-desorption, thermogravimetric/differential thermal analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and temperature-programmed reduction. The results revealed that the samples have a nanocrystalline structure with crystals in the range of 10 to 25 nm, and that all the catalysts have mesoporous pores. The addition of Cu into iron oxide affected its structural and catalytic properties. The sample containing 15 mol% Cu showed the highest specific surface area and catalytic activity, and showed high catalytic stability in low temperature CO oxidation.

Select

Simultaneous detection of hydroxylamine and phenol using p-aminophenol-modified carbon nanotube paste electrode

Ali A. Ensafi, E. Heydari-Bafrooei, B. Rezaei

2013, 34 (9): 1768-1775. DOI: 10.1016/S1872-2067(12)60652-4

摘要 ( 412 ) [Full Text(HTML)] ()

PDF(991KB) ( 699 )

A carbon paste electrode that was chemically modified with multiwall carbon nanotubes and p-aminophenol was used as a selective electrochemical sensor for the simultaneous detection of hydroxylamine (HX) and phenol. Cyclic voltammetry, double potential-step chronoamperometry, square wave voltammetry (SWV), and electrochemical impedance spectroscopy were used to investigate the use of p-aminophenol in the carbon nanotubes paste matrixes as a mediator for the electrocatalytic oxidation of HX and phenol in aqueous solution. The coefficient of electron transfer and catalytic reaction rate constant were determined using the electrochemical methods. Under optimized conditions, the electrocatalytic oxidation current peaks for HX and phenol increased linearly with concentration in the range of 0.5-180.0 and 10.0-650.0 μmol/L for HX and phenol, respectively. The detection limits for HX and phenol were 0.15 and 7.1 μmol/L, respectively. The anodic potential peaks of HX and phenol were separated by 0.65 V in SWV. Because of good selectivity and sensitivity, the present method provides a simple method for the selective detection of HX and phenol in practical samples such as water samples.

Select

含环氧基团的聚合物微球固载2,2,6,6-四甲基哌啶氮氧自由基催化剂的制备及其催化分子氧氧化苯甲醇

余依玲, 高保娇, 李艳飞

2013, 34 (9): 1776-1786. DOI: 10.1016/S1872-2067(12)60651-2

摘要 ( 449 ) [Full Text(HTML)] ()

PDF(780KB) ( 708 )

以甲基丙烯酸缩水甘油酯(GMA)为单体, 以乙二醇二甲基丙烯酸酯(EGDMA)为交联剂, 采用悬浮聚合法制得交联聚甲基丙烯酸缩水甘油酯(CPGMA)微球, 然后以4-羟基-2,2,6,6-四甲基哌啶氮氧自由基(4-OH-TEMPO)为试剂, 使CPGMA微球表面的环氧基团发生开环反应, 从而制得了TEMPO固载化微球TEMPO/CPGMA, 考察了制备条件对固载化反应的影响, 并采用多种方法对微球TEMPO/CPGMA进行了表征. 将微球TEMPO/CPGMA与CuCl组成共催化体系, 用于分子氧氧化苯甲醇, 考察了反应条件对催化体系性能的影响. 结果表明, 以含环氧基团的聚合物微球CPGMA为载体, 通过开环反应, 可成功地实现TEMPO的固载化, 开环反应属S_N2亲核取代反应, 适宜采用溶剂N,N'-二甲基甲酰胺和反应温度85℃. 非均相催化剂TEMPO/CPGMA与助催化剂CuCl构成共催化体系, 在室温、常压O₂条件下可高效地将苯甲醇氧化为苯甲醛, 产物选择性和产率分别为100%和90%. 主催化剂TEMPO与助催化剂CuCl适宜的摩尔比为1:1.2; 主催化剂适宜用量为0.90 g. 此外, TEMPO/CPGMA固体催化剂具有良好的循环使用性能.

Select

In situ generated acylimidazolium acetate as an efficient catalyst and acylating agent for the acetylation of alcohols, phenols, and amines at ambient temperature

Najmeh Nowrouzi, Seyedeh Zahra Alizadeh

2013, 34 (9): 1787-1790. DOI: 10.1016/S1872-2067(12)60660-3

摘要 ( 304 ) [Full Text(HTML)] ()

PDF(270KB) ( 579 )

Acylimidazolium acetate was readily prepared in situ from the reaction of imidazole with acetic anhydride and subsequently acted as a catalyst and acylating agent for the efficient acetylation of alcohols, phenols, and amines at ambient temperature.

Select

Impact Factor of Chinese Journal of Catalysis increases from 1.171 to 1.304 — congratulations and thanks to the authors of our most cited articles

2013, 34 (9): 1791-1795.

摘要 ( 197 ) [Full Text(HTML)] ()

PDF(336KB) ( 454 )

According to the Thomson Reuter report on 20 June 2013, the 2012 Impact Factor of Chinese Journal of Catalysis has improved from 1.171 to 1.304.

过刊目录