Chinese Journal of Chromatography ›› 2015, Vol. 33 ›› Issue (1): 75-79.DOI: 10.3724/SP.J.1123.2014.10012

Previous Articles     Next Articles

Determination of three isothiazolinone biocides in water-borne adhesives by high performance liquid chromatography

ZHOU Xiao1, LI Xiaolan1, CHEN Zhiyan1, YE Changwen2, ZHOU Yun1, MENG Dongling1   

  1. 1. China Tobacco Guangxi Industrial Limited Liability Company, Nanning 530001, China;
    2. Zhengzhou Tobacco Research Institute of China National Tobacco Corporation, Zhengzhou 450001, China
  • Received:2014-10-20 Revised:2014-11-07 Online:2015-01-08 Published:2014-12-26

Abstract:

A rapid high performance liquid chromatography (HPLC) method was developed for the quantitative analysis of three isothiazolinone biocides (2-methyl-4-isothiazolin-3-one (MI), 5-chloro-2-methyl-4-isothiazolin-3-one (CMI) and 1,2-benzylisothiazolin-3-one (BIT)) in water-borne adhesives. The sample was extracted with methanol-water (1: 1, v/v), and purified by centrifugation and filtration. The isothiazolones were separated on a C18 column with methanol-water as mobile phases under gradient elution and detected with a diode array detector (DAD). The pretreatment factors such as extraction solvent, extraction method, dilution ratio, extraction time were optimized. Under the optimized conditions, the targets had good linearities (r2≥0.9992) in the range of 0.25-10.0 mg/L. The recoveries were between 92% and 103% with the relative standard deviations not more than 4%. The limits of detection (LODs) were between 0.43 mg/kg and 1.14 mg/kg. The limits of quantification (LOQs) were between 1.44 mg/kg and 3.81 mg/kg. The results showed that the method can achieve the purpose of quantitative detection. The analyses of real samples verified the reliability of this method.

Key words: high performance liquid chromatography (HPLC), isothiazolone biocides, water-borne adhesives

CLC Number: